Roll of cream glass cloth tape with printed inner core, No.540S

Glass Cloth Tape, 25 mm × 30 m — 0.18 mm, UL510, 200°C (No.540S)

$19.90
Skip to product information

Roll of cream glass cloth tape with printed inner core, No.540S

Glass Cloth Tape, 25 mm × 30 m — 0.18 mm, UL510, 200°C (No.540S)

$19.90
Parameter Value
Thickness 0.18 mm
Length × Width 30 m × 25 mm
Backing glass cloth
Adhesive silicone
Adhesion 6.97 N/25 mm
Tensile strength 589.2 N/25 mm
Elongation 5%
Breakdown voltage 4.5 kV
Rating UL510 Flame Retardant, UL rated 200°C

Glass cloth tape with silicone adhesive for the highest mechanical strength in high-heat electrical work — motor and transformer leads, class H insulation, heat shielding. UL510 flame retardant, UL-rated 200°C.

Questions

What is No.540S used for?

Glass cloth tape with silicone adhesive for the highest mechanical strength in high-heat electrical work — motor and transformer leads, class H insulation, heat shielding.

What temperature is No.540S rated for?

It is UL rated for 200°C.

What width and length does one roll have?

One roll is 25 mm wide and 30 m long.

Typical values measured according to JIS or the manufacturer's test methods. Reference values, not guaranteed values.

Glass cloth tape where the insulation also carries load

No.540S is glass cloth at 0.18 mm with the highest tensile strength in this range, so it is used where the tape is doing mechanical work as well as electrical work: edge protection on a coil, a wrap over a hot part that gets handled, masking during varnish impregnation. Silicone adhesive, 200 °C UL rating, 4.5 kV breakdown.

The full comparison is in electrical insulation tape.

In use

Where this tape earns its keep

Woven glass cloth: it does not melt, stretch apart or burn through.

Glass cloth tape sealing an oven door edge

Oven & appliance seals

Woven glass cloth takes the heat at door edges and frame seams. UL510, 200 °C, 0.18 mm.

Glass cloth tape masking painted trim next to a heat gun

Heat-gun masking

Masks trim, plastic and glass while you strip paint, shrink tubing or solder nearby joints.

Glass cloth tape shielding a loom near an exhaust manifold

Engine bay heat shielding

Wraps looms near manifolds and turbos. 589 N/25 mm tensile means it will not pull apart when wrapped tight.

You may also like